Full, 360° rings, with joints:

• Welded.
• Tacked.
• Open butt joint.
• Coiled.

Segments, less than 360° arc, with ends:

• Untrimmed.
• Rough trimmed.
• Finish trimmed.

Hold Degrees and Tangents:

• Degrees or Arc Length can be held.
• Tangents can be specified on one or both ends.
• Multiple radius combinations.

Bolt holes:

• Drilled.
• Punched.

Slots:

• Punched.

Special sections:

• Forming angle or channel shapes from sheet or plate.
• Special size angle.
• Channel & Beam by shortening flanges.
• WT shapes made by splitting wide flange beams.